# Pops Using SubLab in Logic 10.7

**URL:** <https://community.futureaudioworkshop.com/t/pops-using-sublab-in-logic-10-7/1798>\
**Category:** SubLab\
**Tags:** bug\
**Created:** [September 28, 2023, 10:31pm UTC](https://community.futureaudioworkshop.com/t/pops-using-sublab-in-logic-10-7/1798 "2023-09-28T22:31:30Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![MarkB](https://avatars.discourse-cdn.com/v4/letter/m/a8b319/32.png) [@MarkB](https://community.futureaudioworkshop.com/u/MarkB)\
**Post date:** [September 28, 2023, 10:31pm UTC](https://community.futureaudioworkshop.com/t/pops-using-sublab-in-logic-10-7/1798/1 "2023-09-28T22:31:30Z")

</div>

Hi,

I’ve seen a lot of posts in the past about this and it’s driving me nuts. I just want to pull up SubLab, choose a preset, tweak and go. I’m using SL 1.1.8 in Logic 10.7 Ventura. Do I have to buy XL to fix this?

---

<div class="post-metadata">

**Author:** ![MarkB](https://avatars.discourse-cdn.com/v4/letter/m/a8b319/32.png) [@MarkB](https://community.futureaudioworkshop.com/u/MarkB)\
**Post date:** [November 1, 2023, 8:58pm UTC](https://community.futureaudioworkshop.com/t/pops-using-sublab-in-logic-10-7/1798/2 "2023-11-01T20:58:50Z")

</div>

Is anyone from FW monitoring this community? It would be great to hear from someone regarding my post. @Gavin_FAW

---

<div class="post-metadata">

**Author:** ![Julia](https://yyz1.discourse-cdn.com/flex027/user_avatar/community.futureaudioworkshop.com/julia/32/981_2.png) [@Julia](https://community.futureaudioworkshop.com/u/Julia)\
**Post date:** [November 10, 2023, 4:17pm UTC](https://community.futureaudioworkshop.com/t/pops-using-sublab-in-logic-10-7/1798/3 "2023-11-10T16:17:41Z")

</div>

Hey @MarkB

Apologies for the delayed response, it’s a very busy time of year but we are here 🙏

Yes, it certainly can happen and there are a number of things that can contribute to this. The main thing is to look at these settings: Note Settings, ADSR Settings, Sampler Settings.

 ![Velocity on new note](https://canada1.discourse-cdn.com/flex027/uploads/circlesynth/original/2X/4/4912e28bb5cf7abd74086c78743f3f711b83c57e.png)

There’s only about 5 settings in there, try turning each on and off. Once you find the right setting, you’ll be good to go.

Take care,  
Julia

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex027/uploads/circlesynth/original/2X/5/57e4749b7361f205890dbfe72dd24a9b5b3271eb.png) [@system](https://community.futureaudioworkshop.com/u/system)\
**Post date:** [December 4, 2025, 12:01pm UTC](https://community.futureaudioworkshop.com/t/pops-using-sublab-in-logic-10-7/1798/4 "2025-12-04T12:01:17Z")

</div>

This topic was automatically closed 2 hours after the last reply. New replies are no longer allowed.